Parts & Accessories for Carver Laboratory Presses
Testing/Processing Equipment
Evacuable
Pellet Dies
Used with Pellet Presses to form the pellets for use in IR and
x-ray spectroscopy. The stainless steel die includes a fitting for
vacuum source connection. (6, 12, 13, 25, 31 and 40mm dies available.)
Not recommended for use in heated presses. |
 |
|
No. 2090 - 1.125" I.D. Stainless Steel Test Cylinder
and Pellet Mold
No. 2091.2 - 2.25" ID Stainless Steel Test Cylinder
and Pellet
Mold
For use with pellet presses for molding, forming bricks, briquettes,
pressure forming, crushing, pressing plant and animal tissues, fluid
extraction, extrusion and flow tests. |
 |
|
No.
2090.1 Filters
12 Filter pads for No. 2090 - 1.125" Test Cylinder
No. 2091.1 Filters
12 Filter pads for No. 2091.2 - 2.25" Test Cylinder |
 |
|
No.
2417 Heated 2.25" Test Cylinder
No. 2472 Heated 1.125" Test Cylinder
Heated Test Cylinder with adjustable thermostat to heat test
cylinder up to 600°F. Specify voltage. Consult factory for special
test cylinder sizes. |
 |
|
No. 5021 -- KBr Buffer Plate and One (1) 6"x6" Steel Plate (for new styles only). Recommended for use with dies.
No. 5022 -- KBr Buffer Plate and One (1) 9"x9" Steel Plate (for new styles only). Recommended for use with dies.
No. 5023 -- Set of (2) Two 6"x6" Steel Plates (for new styles only). Recommended if solid smooth surface is required.
No. 5024 -- Set of (2) Two 9"x9" Steel Plates (for new styles only). Recommended if solid smooth surface is required. |
|
No.
2095 KBr Buffer Plate
Recommended for use with dies. The 90mm diameter plate
mounts to top bolsters to prevent damage by the die plunger during
pressing. The buffer plate can be used with other small dies. |
 |
|
No.
2092 Swivel Bearing Plate
Carver presses are frequently used for crushing and breaking tests of standard 2"x2" cubes and 2"x4" cylinders of concrete samples or similar crushing tests. Swivel Bearing Plates adjust slightly to the sample to assure proper application of pressure. |
Requires safety shield.
|
|
No.
3874 Vacuum Pump Kit
Used with pellet press to evacuate molds or dies. |
 |
|
No.
2953CE.A Pressure Cell Assembly, 50ml
(Model M only)
No. 3343CE Pressure Cell Assembly, 100ml
(Model C & M only)
Stainless steel plunge, cylinder and base plug, Includes disruption
valve and seals for efficient pressure release. |
 |
|
No.
2094 Cage Equipment
When using Carver presses to press moisture from fibrous materials,
extract fats, oils or juices from vegetable or animal tissues, splitting
chilled oils or separating crystals from liquors, these accessories
are useful. Cage equipment consists of cylinder, plunger, steel
discs, felt discs, tray and bulb syringe. Requires a daylight
opening of 16 inches. |
 |
|
No.
818744C Punch and Die Holder
This punch and die holder permits testing of pellet and tablet samples. It works with standard BB2 production tooling in most Carver presses, including Auto Series presses. The set includes an anodized aluminum holding fixture, steel shims to adjust for various size samples, and an anodized aluminum ejector. |
 |
|
No.
2093 Plate and Cloth Equipment
Plate and Cloth equipment for material not easily held in Cage equipment.
Consist of tray, forming frame, screens and soft cloth. |
 |
|
No.
237005 Stainless Steel Pan
Fluid pan for use with all Test Cylinder Outfits. When presses
are used for fluid extraction, filter papers sandwich the sample.
The stainless steel pan captures the release fluid. |
 |
Testing/Processing - Catalog Number Cross Reference Index
Polished Chrome Plates and Blotters (for laminating applications) |
235020 |
Plate with 2-3 micro-inch finish, 1 side polished, 6" x 6" x .031" thick |
235021 |
Plate with 2-3 micro-inch finish, 1 side polished, 9" x 9" x .031" thick |
235022 |
Plate with 2-3 micro-inch finish, 1 side polished, 9" x 12" x .031" thick |
235023 |
Plate with 2-3 micro-inch finish, 1 side polished, 12" x 12" x .031" thick |
823003 |
Protective blotter, 6" x 6" |
823012 |
Protective blotter, 9" x 9" |
823005 |
Protective blotter, 9" x 12" |
Pellet Dies - Catalog Number Cross Reference Index
| Pellet Dies |
4417 |
6mm pellet die, 440 SS, 3,500 lbs Maximum Applied Force |
4946 |
12mm pellet die, 440 SS, 13,000 lbs Maximum Applied Force |
3619 |
13mm pellet die, 440 SS, 18,000 lbs Maximum Applied Force |
4369 |
25mm pellet die, 440 SS, 47,000 lbs Maximum Applied Force |
3902 |
31mm pellet die, 440 SS, 60,000 lbs Maximum Applied Force |
3876 |
40mm pellet die, 440 SS, 70,000 lbs Maximum Applied Force |
|
Carver reserves the right to change specifications without notice. Presses and accessories may differ from photos shown. |
Carver strongly recommends the use of a safety shield and personal protection equipment when operating Carver equipment. |
|
